木工刀具网

 找回密码
 注册

QQ登录

只需一步,快速开始

互动
互动
技术
技术
相关
相关
展示
展示
查看: 498|回复: 0

[Router Bits] How To Use Tools/Bits of CNC Router Machines?

[复制链接]

该用户从未签到

发表于 2019-3-1 11:54:42 | 显示全部楼层 |阅读模式
0

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区

您需要 登录 才可以下载或查看,没有帐号?注册

x
The selection and use of tools/bits and fixtures are very important in the process of engraving and cutting works CNC router machines. Incorrect use can easily cause damage to the tools/bits, even the engraving effect will be greatly reduced. How to select and use tools/bits for wood cnc router machine? Some principles here should be well considered.

                               
登录/注册后可看大图

1.The size of tools/bits and fixtures should be suitable. The fixture which has section, the inner hole is not good enough, worn for a long time and the inner hole is tapered must not be selected, the engraving performance will be affected and thus is not satisfactory owing to the shaking of tool handle;
2.The tool handle should be matched with the fixture and can be smoothly inserted into and out of the fixture. The handle should be firmly put into the fixture and be well fastened. If the tool fixture is used for a long time, the inner hole will be deformed and the new one should be replaced in time.
3.Always check the toughness and sharpness of the tool. If the tool is found to be blunt or the knife edge is damaged,replace it immediately. If you continue to use it, not only the engraving effect is not good, but also the risk of breaking the tools will arise.

                               
登录/注册后可看大图

4.The thickness of material to be processed shall not exceed the thickness of the cutting edge that can be cut and engraved. Otherwise, the tool/bitwill be broken or the engraving effect may be unsatisfactory.
5.For engraving and cutting of different materials, different tools/bits should be selected and the cutting& engraving speed should be modified reasonably.
6.During the working process of the engraving machine, the tool/bit that rotates at high speed is very sharp. Pay attention to keep an enough distance to the object under working. Pay special attention not to wear oversize clothes and women should wrap the hair to prevent accidents..
7.The engraving and cutting speed should be balanced, the processing speed should be kept as consistent as possible, and the engraving and cutting process is best done at one time to prevent the occurrence of cross-section marks owing to the break-point.
wood cnc router machine
wood cnc router machine
8.It is best to clean the tool/bit with professional cleaner.
9.Apply butter to prevent rusting of the tool/bit when the tool is not in use.
10.Do not polish and change the shape of tools/bits at will.

您需要登录后才可以回帖 登录 | 注册

本版积分规则

木工刀具论坛·免责声明

本站提供网上自由讨论使用,所有个人言论并不代表本站立场,与本站立场无关,本站不会对其內容负任何责任。
木工刀具网是非营利性交流网站,旨在进行个人学习和交流。本站内容均经过严格审查筛选,网站部分文章和资料均从网上搜集整理,由热心网友自由上传,版权归原作者所有,只做为交流学习之用,不得用于商业用途,法律后果自负。如您发现违反国家法律法规的相关內容,请立即联系我们,我们立刻从网站上删除,并致以最深的歉意。 Email:yygyfnn@163.com 微信:157561175点击这里给我发消息 点击这里给我发消息点击这

里给我发消息

网站首页| 关于我们| 广告招商| 帮助中心 手机版|Archiver|家具木工机械刀具 ( 湘ICP备17003003号  map

GMT+8, 2019-11-16 07:46 , Processed in 0.203128 second(s), 37 queries . 公网安备 33011802001189号

Powered by Discuz! Templates yeei! © 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表